Oxidative-biomimetic systems applied to enzymatic hydrolysis of lignocellulosic materials

Author(s)

Omar Antonio Uyarte Noriega

• Document type: Doctoral Thesis
• Press: Lorena.
• Institution: Universidade de São Paulo (USP). Escola de Engenharia de Lorena (EEL/ASDI)
• Defense date: 2016-06-29

Examining board members

André Luis Ferraz; Valdeir Arantes; Francides Gomes da Silva Junior; Flávio Teixeira da Silva; Fabio Marcio Squina

• Advisor: André Luis Ferraz

Abstract

The current scientific literature shows that lignin removal can facilitates subsequent processes of enzymatic saccharification of lignocellulosic materials. However, most of the delignification processes use severe reaction conditions and present high process costs. One alternative for the severe delignification processes includes the use of biomimetic systems. These systems can be applied under mild reaction conditions, which are compatible with the enzymatic hydrolysis step. Nevertheless, biomimetic systems usually present low reaction rates and are less efficient than the more severe chemical and chemithermomechancial processes. Weighing these facts, the main subject of the current PhD thesis was to study oxidative-biomimetic systems suitable for delignification of lignocellulosic materials as a previous step to the enzymatic hydrolysis of the polysaccharide fraction. The experimental approach involved the pretreatment of sugar cane bagasse (three different sugar cane cultivars were evaluated) by a chemithermomechanical (CTM) process under mild reaction conditions (5% of Na2SO3 and 2.5% NaOH), followed by an oxidative-biomimetic system. This approach aimed to prepare a partially delignified material suitable to be treated by the subsequent biomimetic systems, providing significant changes in the material recalcitrance. A second pretreatment under more severe reaction conditions (10% Na2SO3 and 5% NaOH) was performed to prepare a reference material with low recalcitrance. The biomimetic systems used in the current work were based on natural wood decay processes involving white- and brown-rot fungi, and include the actions of: a) Manganese peroxidase, Laccase, Iron íons and Oxygen; b) Chelator Mediated Fenton reactions (CMF). This reaction systems used (or not) the presence of unsaturated fatty acids to induce formation of organoperoxyl radicals. The CMF reactions presented chemiluminescence, which enabled the reaction optimization with basis on maximal chemiluminescence. The lignin removal during the CTM pretreatment varied according to the alkaline-sulfite load used in the reaction. The delignification increased with increased alkaline-sulfite loads reaching 26% and 54% for the less severe and more severe reaction conditions, respectively. Biomimetic systems applied over the mild-pretreated sugar cane bagasse produced varied delignification levels, reaching maximal values for cumulative lignin removal of 44% and 62% for the CMF and Oxigen, respectively. In all cases, the supplementary removal of lignin resulted in more efficient enzymatic hydrolysis of the polysaccharide fraction. The highest cellulose and hemicellulose conversions (over 80%) was obtained with the CMF system applied on a sugar cane cultivar that contained high hydroxycinnamic acids contents, suggesting an efficient action of CMF systems for hydroxycinnamic acids removal. (AU)

• FAPESP's process: 12/07412-0 - Biomimetic sistems applied to enzimatic hydrolise of lignocellulosic material
• Grantee: Omar Antonio Uyarte Noriega
• Support Opportunities: Scholarships in Brazil - Doctorate (Direct)