Theoretical and experimental analysis of space steel structures composed of bars with stamping extremities

Author(s)

Carlos Henrique Maiola

• Document type: Master's Dissertation
• Press: São Carlos.
• Institution: Universidade de São Paulo (USP). Escola de Engenharia de São Carlos (EESC/SBD)
• Defense date: 1999-03-25

Examining board members

Maximiliano Malite; Eduardo de Miranda Batista; Roberto Martins Gonçalves

• Advisor: Maximiliano Malite

Abstract

In Brazil the use of tubular bars with stamping extremities is common in space steel structures, as it means a significant reduction of cost, when caompared with more elaborete system, due to its simplicity of manufacture and assembly. However it is apparently an uncertain system from a structural point of view, which requires studies establishing safe utilization criteria. This paper presents theorical and experimental analysis of this structures. The usual constructive situation of space structure with \'nós típicos\' (bars with flattened ends, superposed and connected by a unique bolt), and \'nós de aço\' (connection system formed by a piece with steel fin welded) was studied. The experimental results were obtained in tests of four prototypes which simulated a section of space structure composed of a mesh squareon- square, with nine 2.5 x 2.5 x 1.5 (m) pyramidal modules, totaliing a structure with 7.5 x 7.5 x 1.5 (m) dimensions, supported by columns in their vertices, permiting to compare the stiffness, the failure manner and the resistance of this prototypes. The theorical analysis of prototypes was carried out by assuming the cases of linearity and physical and geometric non-linearity, taking into consideration the variation of stiffness of the bars next to the nodes. (AU)