Experimental analysis of high strength concrete columns (60 MPa) under axial compression

Author(s)

Marcos Vinícios Mendonça de Queiroga

• Document type: Master's Dissertation
• Press: São Carlos.
• Institution: Universidade de São Paulo (USP). Escola de Engenharia de São Carlos (EESC/SBD)
• Defense date: 1999-03-30

Examining board members

José Samuel Giongo; Mounir Khalil El Debs; Yosiaki Nagato

• Advisor: José Samuel Giongo

Abstract

This research\'s aim is to obtain information for design of high strength concrete columns under concentrically loads with medium cylinder compressive strength of 60 MPa. This project belongs to a more extensive plan which already has experimental results that represent the behavior of columns performed with concrete with medium cylinder compressive strength of 80 MPa. In these models has been verified the independent participation of concrete core defined by the transversal reinforcement axis as resistant section near the ultimate load. In the experimental stage it was tested twelve columns with square (200 mm x 200 mm) and rectangular (150 mm x 300 mm) cross sections. The height of the columns corresponds to six times the smallest dimension of the cross section, 1,200 mm and 900 mm, respectively. The medium value of the ratios between the ultimate experimental force and the ultimate theoretical force, regarding the full concrete section, was 0.82, indicating that the resistant section is not the full section. On the other hand, the medium of ratios between the ultimate experimental force and the ultimate theoretical force, considering only the core area limited by the axis of the lateral reinforcement bars, was 1.21, what shows that the resistant section can be considered as the core section in the Ultimate Limit State. (AU)