Full text
| |
| Author(s): |
Rosana Vilarim da Silva
Total Authors: 1
|
| Document type: | Doctoral Thesis |
| Press: | São Carlos. |
| Institution: | Universidade de São Paulo (USP). Instituto de Física de São Carlos (IFSC/BT) |
| Defense date: | 2003-06-27 |
| Examining board members: |
Dirceu Spinelli;
Jonas de Carvalho;
Salvador Claro Neto;
Elisabete Frollini;
José Ricardo Tarpani
|
| Advisor: | Dirceu Spinelli |
| Abstract | |
The new paradigm in preserving the environment and the use of natural products has contributed to increase the interest in the development and use of derived biomass materials. In this sense, the polymeric composites with natural fibers appear to be a good alternative for engineering applications. The main targets of this work were the processing and characterization of composites obtained by a polyurethane resin derived from castor oil and sisal and coir fibers. The compression moulding technique was used to process the composite. The fibers were employed in different forms such as: short fibers, long fibers, biaxial weave and continuos yarns. Tension, bend, impact, fracture toughness, water absorption and DMTA tests were used to characterize the composites. The sodium hidroxide (10%) treatment effect on the sisal and coir fibers was also evaluated. The results showed, in general, that the coir fibers composites performance were inferior to the sisal fibers composites, and even to the polyurethane matrix. Under tension and bending conditions, the long sisal fibers presented the best reinforcement effect, followed by the continuous yarns, short fibers, and the biaxial weave. Under impact and fracture toughness tests, the best performance was enhanced by sisal weave composites. The alkaline treatment effect varied in accordance with test type and reinforcement geometry. In tension and bending tests, its effect was positive for composites with short and long fibers and negative for composites with weave and yarns. This late was due to deterioration of the yarn structure. In the impact and toughness tests, the alkaline treatment effect was harmful, because when adherence is improved at the interface, the main energy absorption mechanisms are reduced, that mean, the fibers are pulled out and interface is debonded. Water absorption measurements showed an increase in the absorption level for the composites with higher volumetric fraction of fibers. The maximum water absorption was 17% for composites with non-treated coir short fibers. This percentage decreased for composites with treated fibers. In the dynamic mechanical thermal analysis (DMTA) the composites showed an increased storage modulus and a decreased glass transition temperature, Tg, when compared to polyurethane matrix. This behaviour was proportional to the increase of the fibers volumetric fraction. (AU) | |