A new technique for incorporation of TiO2 nanotubes on a pre-sintered Y-TZP and its effect on bond strength as compared to conventional air-borne particle abrasion and silicatization TiO2 nanotubes application on pre-sintered Y-TZP

Author(s)

Mezarina-Kanashiro, Franco Naoki ; Bronze-Uhle, Erika Soares ; Piola Rizzante, Fabio Antonio ; Lisboa-Filho, Paulo Noronha ; Sanches Borges, Ana Flavia ; Furuse, Adilson Yoshio

• Document type: Journal article
• Source: Dental Materials; v. 38, n. 8, p. 11-pg., 2022-07-26.

Abstract

Objective: This study evaluated the microshear bond strength of a resin cement to Y-TZP after different methods of TiO2 nanotubes (nTiO(2)) incorporation on pre-sintered Y-TZP surfaces. Methods: nTiO2 were synthesized and incorporated on Y-TZP slices as follows (n = 15): 1) nTiO2 mixed with isopropyl alcohol/manual application (MAl); 2) nTiO2 mixed with acetone/manual application (MAc); 3) nTiO(2) mixed with isopropyl alcohol/high-pressure vacuum application (HPVAl); 4) nTiO(2) mixed with acetone/high-pressure vacuum application (HPVAc). As controls, surfaces were sandblasted with Al2O3 (OX) or Rocatec silicatization (ROC). All ceramics were sintered after nTiO(2) incorporation. Surface treatments of OX and ROC were made after sintering. Surfaces were characterized by confocal laser microscopy, scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Resin composite cylinders (1.40 mm diameter and 1 mm height) were cemented with a resin cement, stored in water at 37 degrees C for 24 h and thermocycled for 10 000 cycles before microshear bond strength evaluation. Data were analyzed with one-way ANOVA and Games-Howell (alpha = 0.05), and fracture analysis was performed using a stereomicroscope. Results: EDS confirmed the presence of TiO2 on treated Y-TZP. The confocal analysis showed higher roughness for HPVAc and OX. There were significant differences between surface treatments (p < 0.001). HPVAl (22.96 +/- 10.3), OX (34.16 +/- 7.9) and ROC (27.71 +/- 9.4) showed higher microshear bond strengths and were statistically similar (p > 0.05). MAC showed intermediary values, and HPVAc and MAl presented decreased bond strength, with a high percentage of premature debonding. Conclusion: High-pressure vacuum application of nTiO(2) mixed with isopropyl alcohol was able to produce bond strength values compared to conventional air abrasion and Rocatec silicatization. Significance: The infiltration of TiO2 nanostructures on the pre-sintered Y-TZP is an interesting approach that can improve bond strength without the need of sandblasting methods. (c) 2022 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved. (AU)

• FAPESP's process: 19/05427-9 - Dental adhesives modified by TiO2 nanotubes as carriers of enzyme inhibitors: synthesis, functionalization and incorporation of nanotubes and evaluation of enzymatic activity physico-chemical, mechanical and biological properties
• Grantee: Adilson Yoshio Furuse
• Support Opportunities: Regular Research Grants