Durability evaluation of the shade characterization layer on monolithic ceramics

• Grant number: 18/05908-4
• Support Opportunities: Regular Research Grants
• Start date: June 01, 2018
• End date: November 30, 2020
• Field of knowledge: Health Sciences - Dentistry - Dental Materials
• Principal Investigator: Lilian Costa Anami Paulin
• Grantee: Lilian Costa Anami Paulin
• Host Institution: Instituto de Ciência e Tecnologia (ICT). Universidade Estadual Paulista (UNESP). Campus de São José dos Campos. São José dos Campos , SP, Brazil
• Associated researchers: Letícia Cristina Cidreira Boaro ; Marco Antonio Bottino ; William Cunha Brandt

Abstract

The characterization layer can be applied over monolithic ceramics to improve the aesthetic quality of the restorations, and it can be veneered by glaze that would have a protective function for the underlying material. Both layers are subjected to the natural wear process that happes in the oral environment, which may occur during mastication, touch and/or tooth tightening and brushing. The objectives of this study are the evaluation the effect of wear methodologies that simulate mastication with different antagonists, abrasion and brushing on ceramic materials available for monolithic restorations (Part I), as well as the action of these wear techniques on a characterization layer of hybrid polymer ceramic (PIC) applied after different surface treatments on presence or not og the glaze layer (Part II). In Part I, a high translucency zirconia (YZHT), zirconia reinforced lithium silicate (ZLS) and feldspathic (FD) ceramics will be tested. In step II, the PIC surface will be treated with polishing, hydrofluoric acid and silanization, blasting and silanization, or application of a self-etching silane. After measurement of the initial roughness of all specimens, different specimens from each experimental group will be tested under three-body wear, brushing wear and simulation of physiological wear with steatite, PIC or YZHT antagonists, followed by biaxial flexion test. Specimens will be subjected to a topographic analysis with the aid of stereomicroscope, scanning electron microscope and X-ray spectroscopy. The data of wear, roughness and flexural strength will be statistically analyzed, and images will be described. The results will be discussed ahead of the relevant literature. (AU)

Scientific publications

(References retrieved automatically from Web of Science and SciELO through information on FAPESP grants and their corresponding numbers as mentioned in the publications by the authors)

DAL PIVA, AMANDA MARIA DE OLIVEIRA; BOTTINO, MARCO ANTONIO; ANAMI, LILIAN COSTA; WERNER, ARIE; KLEVERLAAN, CORNELIS JOHANNES; LO GIUDICE, ROBERTO; FAMA, FAUSTO; SILVA-CONCILIO, LAIS REGIANE DA; TRIBST, JOAO PAULO MENDES. Toothbrushing Wear Resistance of Stained CAD/CAM Ceramics. COATINGS, v. 11, n. 2, FEB 2021. (18/05908-4, 17/11535-3, 18/03984-5, 18/07404-3)

DAL PIVA, AMANDA M. O.; TRIBST, JOAO P. M.; WERNER, ARIE; ANAMI, LILIAN C.; BOTTINO, MARCO A.; KLEVERLAAN, CORNELIS J.. Three-body wear effect on different CAD/CAM ceramics staining durability. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, v. 103, MAR 2020. (18/05908-4, 17/11535-3, 18/07404-3, 18/03984-5)

TRIBST, JOAO P. M.; DAL PIVA, AMANDA M. O.; WERNER, ARIE; ANAMI, LILIAN C.; BOTTINO, MARCO A.; KLEVERLAAN, CORNELIS J.. Durability of staining and glazing on a hybrid ceramics after the three-body wear. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, v. 109, SEP 2020. (18/05908-4, 17/09104-4, 18/07404-3, 18/03984-5)