On the conductivity of PEDOT:PSS thin films.

Author(s)

Alexandre Mantovani Nardes

• Document type: Doctoral Thesis
• Press: São Paulo.
• Institution: Universidade de São Paulo (USP). Escola Politécnica (EP/BC)
• Defense date: 2007-12-18

Examining board members

Adnei Melges de Andrade; Roberto Mendonça Faria; Osvaldo Novais de Oliveira Junior

• Advisor: Adnei Melges de Andrade

Abstract

Employing the unique mechanical, electronic, and optical properties of the conjugated organic and polymer materials several technological and commercial applications have been developed, such as sensors, memories, solar cells and light-emitting diodes (LEDs). In this respect, the central theme of this thesis is the electrical conductivity and mechanisms of charge transport in PEDOT:PSS, a polymer blend that consists of a conducting poly(3,4-ethylenedioxythiophene) polycation (PEDOT) and a poly(styrenesulfonate) polyanion (PSS). PEDOT:PSS is omnipresent as electrode material in plastic electronics applications mentioned above. Although the conductivity of PEDOT:PSS can vary by several orders of magnitude, depending on the method by which it is processed into a thin film, the reason for this behavior is essentially unknown. This thesis describes a detailed study of the anisotropic charge transport of PEDOT:PSS and its correlation with the morphology, the shape, and the dimension of the phase separation between the two components, PEDOT and PSS. Before addressing the properties of PEDOT:PSS, a new barrier layer is described in Chapter 2 that enhances the lifetime of organic devices. An important degradation mechanism in polymer LEDs is photo-oxidation of the active layer. Hence, isolating the active layer from water and oxygen is crucial to the lifetime. Plasma-enhanced chemical vapor deposition (PECVD) is used to deposit a thin layer of carbon nitride at low deposition temperatures, below 100 °C, on a polymer LED that uses poly[2-methoxy-5-(2´-ethylhexyloxy)-1,4- phenylene vinylene] (MEH-PPV) as active layer. A thin layer of carbon nitride acts as barrier for humidity, but is still sufficiently bendable to be used in flexible polymer LEDs. The characteristics of carbon nitride and MEH-PPV films have been investigated using optical spectroscopy, with particular emphasis on the degradation process of MEH-PPV under illumination. The measurements show that the carbon nitride coating indeed protects the polymer film and diminishes the photo-oxidation considerably. To study the effect of the encapsulation in real devices, polymer LEDs were made and their current-voltage characteristics confirm the enhanced lifetime in the presence of a carbon nitride barrier layer. However, the target, a lifetime of more than 10,000 hours for commercial applications, was not achieved. The remaining chapters of this thesis describe the investigations of PEDOT:PSS. PEDOT:PSS is widely used in organic electronics. So far, relatively little attention has, been paid to the mechanisms of charge transport in this material and the correlation of those properties to the morphology. In Chapter 3, scanning probe microscopy (SPM) and macroscopic conductivity measurements are used to obtain a full 3D morphological model that explains, qualitatively, the observed anisotropic conductivity of spin coated PEDOT:PSS thin films. Topographic scanning probe microscopy (STM) and cross-sectional atomic force microscopy images (X-AFM) reveal that the thin film is organized in horizontal layers of flattened PEDOT-rich particles that are separated by quasi-continuous PSS lamella. In the vertical direction, the horizontal PSS insulator lamellas lead to a reduced conductivity and impose nearest-neighbor hopping (nn-H) transport. In the lateral direction, 3D variable-range hopping (3D-VRH) transport takes place between PEDOT-rich clusters which are separated by much thinner barriers, leading to an enhanced conductivity in this direction. This discussion is extended in Chapter 4, where a quantitative description of the length scales of the predominant transport is obtained. Particularly, it is demonstrated that the hopping process takes place between PEDOT-rich islands and not between single PEDOT segments or dopants in the lateral direction, whilst in the vertical direction the current limiting hopping transport occurs between dilute states inside the quasi-insulating PSS lamellas. By a post-treatment it is possible to modify PEDOT:PSS to raise its conductivity, by orders of magnitude. Typically, the addition of sorbitol to the aqueous dispersion of PEDOT:PSS that is used to deposit thin films via spin coating leads to an enhancement of the conductivity after thermal annealing. The causes and consequences of such behavior were investigated in detail. Chapter 5 describes the various properties of the highly conductive sorbitol-treated PEDOT:PSS, such as the conductivity itself, and the effects of thermal annealing and exposure to moisture. It is found that the conductivity enhancement upon addition of sorbitol is accompanied by a better environmental stability. Surprisingly, the electrical conductivity of PEDOT:PSS thin films without sorbitol treatment is increased by more than one order of magnitude in an environment with more than 30-35 % relative humidity. This effect is attributed to an ionic contribution to the overall conductivity. Thermal gravimetric analysis (TGA), direct insert probe-mass spectrometry (DIP-MS) and modulation differential scanning calorimetry (MDSC) were used as additional tools to demonstrate that, after thermal treatment, the concentration of sorbitol in the final PEDOT:PSS layer is negligibly small. In Chapter 6, scanning Kelvin probe microscopy (SKPM) is employed to measure the surface potential and work function of this PEDOT:PSS films that were deposited from water with different sorbitol concentrations. It is shown that work function of PEDOT:PSS is reduced with increasing sorbitol concentration. This shift can be explained by and is in agreement with- a reduction in the surface enrichment with PSS of the film. To study the charge transport properties of the highly conductive sorbitoltreated PEDOT:PSS films, temperature dependent and electric field dependent measurements are correlated with morphological analysis by STM in Chapter 7. It is found that by sorbitol treatment the hopping transport changes from 3DVRH to 1D-VRH. This transition is explained by a sorbitol-induced selforganization of the PEDOT-rich grains into 1D aggregates that are aligned within micrometer sized domains, as observed in STM images. (AU)