Nanocellulose/PHBV composites: microfibilated mats by electrospinning

Author(s)

Kelly Cristina Coelho de Carvalho Benini

• Document type: Doctoral Thesis
• Press: Guaratinguetá. 2015-05-14.
• Institution: Universidade Estadual Paulista (Unesp). Faculdade de Engenharia. Guaratinguetá
• Defense date: 2015-02-25
• Advisor: Herman Jacobus Cornelis Voorwald; Maria Odila Hilário Cioffi

Abstract

The production of nanobiocomposites has grown in recent years considering the need to develop materials to replace those produced using raw materials derived from petroleum and that take a long time to degrade, damaging the environment. However, nanobiocomposites of PHBV/cellulose nanocrystals (CNC), were obtained by solvent casting and electrospinning. First of all, was determined the best sequence of chemical treatments to obtain cellulose from brazilian satintail, and the conditions were: alkali treatment with NaOH solution (5% w/w) at 75°C , followed by three stages of bleaching with H2O2/NaOH. Then, following a design of experiments (DOE) it was possible to determine the best conditions of acid hydrolysis to obtain the CNC: H2SO4 60% (w/w) at 60°C for 30 min (CNC4) and H2SO4 64% (w/w) at 35°C for 75 min (CNC9). Afterwards, other DOE was conducted to determine the most appropriate PHBV solubility and processing parameters, and the results obtained led to the choice of the following parameters: PHBV solution containing 5% (w/w) of polymer in solvent dimethylformamide and chloroform (ratio 22/78), solubilized at 50°C for 30h; casting at 153°C, and electrospinning with needle (20x10), drum rotation of 27 rpm, working distance of 10 cm and environmental conditions close to 25°C and 50% of moisture. Finally, the nanocomposites PHBV/NCC4 and PHBV/NCC9 were obtained with the addition of 1% (w/w) of reinforcement by casting and electrospinning process, following the solubility and processing conditions determined at DOE. The addition of CNC in the nanocomposites obtained by solvent casting did not change the transparency of the films and provided a significant decrease in the polymer crystallization temperature, mainly with the addition of CNC4, whereas for electrospun nanocomposites, provided a considerable improvement in process efficiency, by ... (Complete abstract click electronic access below) (AU)

• FAPESP's process: 11/14153-8 - Nanocellulose/PHBV composites: microfibilated mats by electrospinning
• Grantee: Kelly Cristina Coelho de Carvalho Benini
• Support Opportunities: Scholarships in Brazil - Doctorate