Production of membranes from sugarcane bagasse and its application in the detoxification of hemicellulosic hidrolizate

Author(s)

Rafael Garcia Candido

• Document type: Doctoral Thesis
• Press: Lorena.
• Institution: Universidade de São Paulo (USP). Escola de Engenharia de Lorena (EEL/ASDI)
• Defense date: 2015-03-17

Examining board members

Adilson Roberto Gonçalves; Larissa Canilha; Sirlene Maria da Costa; Luis Fernando Figueiredo Faria; João Paulo Alves Silva

• Advisor: Adilson Roberto Gonçalves

Abstract

Membrane separation processes (MSP) have been highlighted at industrial processes because of their advantages, mainly the low cost of implementation and the low energy consumption during their operation. The utilization of agriculture co-products for the obtainment of material is a increasing trend, wherein the main attractive are the high availability and the low cost of these co-products. The aims of this work were to produce membranes and to investigate their utilization in the detoxification of the hemicellulosic hydrolisate originated from the acid treatment of sugarcane bagasse. For that, two types of membranes were produced from three different types of polymers, cellulose acetate obtained from sugarcane bagasse, commercial cellulose acetate and polyamide 66. For the production of the sugarcane bagasse cellulose acetate it was conducted an exploratory study in order to extract cellulose, raw-material of the acetate, in a manner that the final material possessed high purity degree and the losses of cellulose during the process were minimized. The technique of phase inversion was utilized to produce the membranes. In the case of cellulose acetate membranes, the variation of the membrane production parameters (time of solvent evaporation, temperature of coagulation bath and thermical treatment) was performed for the purpose of establishing the best process parameters, whereas it was utilized previously established conditions found in the literature for the polyamide membrane production. The membranes were characterized physically and for their properties of pure water flux, vapor water flux, salt rejection, sugar rejection and toxic compound rejection. Finally, the membranes were applied in the process of hemicellulosic hydrolysate detoxification for testing their capacity of furfural, hydroxymethylfurfural (HMF), acetic acid and phenolic compound removal. The best conditions of cellulose extraction from sugarcane bagasse were able to produce cellulose with 84.01% of purity. The sugarcane cellulose acetate presented a substitution degree of 2.52, being classified as cellulose triacetate. In comparison, commercial cellulose acetate presented a substitution degree of 2,85. Physically, all membranes possessed a morphology that interspersed the presence of porous and nodular regions. Due to their fragility, sugarcane bagasse membranes were supported by a polysulfone commercial membrane in the tests of permeation under pressure. All sugarcane bagasse membranes and polyamide membrane achieved pure water flux. Nevertheless, just some commercial cellulose acetate membranes could permeate pure water. In the assays of compound rejection, the membranes reached different results, on behalf of their structural differences. The membrane that obtained the best performance in the detoxification process was the membrane produced form commercial cellulose acetate. This membrane was able to remove 89.92% of HMF, 91.99% of furfural, 51.52% of acetic acid and 8.35% of phenolic compounds. The membranes produced from sugarcane bagasse reached a removal of 71.66 of HMF, 60.87% of furfural, 91.79% of acetic acid and 10,86% of phenolics. (AU)

• FAPESP's process: 10/20396-8 - Production of membranes from sugarcane bagasse and its application in the detoxification of hemicellulosic hidrolizate
• Grantee: Rafael Garcia Candido
• Support Opportunities: Scholarships in Brazil - Doctorate