Models and methods for the direct simulation of rough and micropatterned surfaces

Author(s)

Hugo Marcial Checo Silva

• Document type: Doctoral Thesis
• Press: São Carlos.
• Institution: Universidade de São Paulo (USP). Instituto de Ciências Matemáticas e de Computação (ICMC/SB)
• Defense date: 2016-02-12

Examining board members

Gustavo Carlos Buscaglia; Enzo Alberto Dari; Luis Felipe Feres Pereira; Fabrício Simeoni de Sousa; Antonio Eduardo Meirelles Tomanik

• Advisor: Gustavo Carlos Buscaglia

Abstract

Friction in hydrodynamic bearings are a major source of losses in car engines ([69]). The extreme loading conditions in those bearings lead to contact between the matching surfaces. In such conditions not only the overall geometry of the bearing is relevant, but also the small-scale topography of the surface determines the bearing performance. The possibility of shaping the surface of lubricated bearings down to the micrometer ([57]) opened the question of whether friction can be reduced by mean of micro-textures, with mixed results. This work focuses in the development of efficient numerical methods to solve thin film (lubrication) problems down to the roughness scale of measured surfaces. Due to the high velocities and the convergent-divergent geometries of hydrodynamic bearings, cavitation takes place. To treat cavitation in the lubrication problem the Elrod- Adams model is used, a mass-conserving model which has proven in careful numerical ([12]) and experimental ([119]) tests to be essential to obtain physically meaningful results. Another relevant aspect of the modeling is that the bearing inertial effects are considered, which is necessary to correctly simulate moving textures. As an application, the effects of micro-texturing the moving surface of the bearing were studied. Realistic values are assumed for the physical parameters defining the problems. Extensive fundamental studies were carried out in the hydrodynamic lubrication regime. Mesh-converged simulations considering the topography of real measured surfaces were also run, and the validity of the lubrication approximation was assessed for such rough surfaces. (AU)

• FAPESP's process: 11/24147-5 - Advanced computational methods for the simulation of lubrified contacts
• Grantee: Hugo Marcial Checo Silva
• Support Opportunities: Scholarships in Brazil - Doctorate