Advanced search
Start date
Betweenand
(Reference retrieved automatically from Web of Science through information on FAPESP grant and its corresponding number as mentioned in the publication by the authors.)

Nitride coatings improve Ti-6Al-4V alloy behavior in creep tests

Full text
Author(s):
Oliveira, V. M. C. A. ; Vazquez, A. M. ; Aguiar, C. ; Robin, A. ; Barboza, M. J. R.
Total Authors: 5
Document type: Journal article
Source: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; v. 670, p. 357-368, JUL 18 2016.
Web of Science Citations: 5
Abstract

This study aimed to evaluate the effect of plasma-assisted PVD TiN and TiAlN/TiAlCrN coatings on the Ti-6Al-4V alloy under creep conditions at 600 degrees C. Microstructural and surface coating analysis were investigated using XRD, optical and scanning microscopy and isothermal oxidation. The results showed that the TiN coated sample showed the lowest secondary creep rate values for stresses greater than 222 MPa. Below 222 MPa, the TiAlN/TiAlCrN coated sample presented a secondary creep rate value higher than the TiN coated sample. This behavior was due to TiAlN/TiAlCrN oxidation resistance that, according to isothermal oxidation tests, did not suffer oxidation at 600 degrees C. The stress exponent analysis indicated that the main creep mechanism was controlled by climbing dislocations. The fracture mode is similar for all conditions studied and displayed transgranular fracture with decohesion of intergranular regions. Finally, the coated samples contribute to improved oxidation resistance, reduced damage tolerance parameter (lambda) and increased lifetime of Ti-6Al-4V alloy. (C) 2016 Elsevier B.V. All rights reserved. (AU)

FAPESP's process: 11/00511-0 - Study of the phenomena of creep, corrosion and isothermal oxidation of Ti-6Al-4V subjected to TiN and TiAlN coatings deposited by plasma-assisted PVD technologies.
Grantee:Verônica Mara de Oliveira Velloso
Support Opportunities: Scholarships in Brazil - Doctorate
FAPESP's process: 13/00885-2 - Evaluation of TiN PVD coating on creep resistance of Ti-6Al-4V
Grantee:Carla de Aguiar
Support Opportunities: Scholarships in Brazil - Scientific Initiation
FAPESP's process: 13/00886-9 - Study on the creep phenomenon of Ti-6Al-4V submitted to TiAl coating deposited by PVD plasma-assisted technique
Grantee:Amira Muci Vazquez
Support Opportunities: Scholarships in Brazil - Scientific Initiation