Comparative evaluation of the effectiveness of alcohol-based sanitizers, UV-C radiation and hot air on three-age Salmonella biofilms

Author(s)

von Hertwig, Aline M. ; Prestes, Flavia S. ; Nascimento, Maristela S.

• Document type: Journal article
• Source: FOOD MICROBIOLOGY; v. 113, p. 8-pg., 2023-04-15.

Abstract

Dry sanitation is recommended to control contamination and prevent microbial growth and biofilm formation in the low-moisture food manufacturing plants. The objective of this study was to evaluate the effectiveness of dry sanitation protocols on Salmonella three-age biofilms formed on stainless steel (SS) and polypropylene (PP). Biofilms were formed for 24, 48 and 96 h at 37 degrees C using a cocktail of six Salmonella strains (Muenster, Miami, Glostrup, Javiana, Oranienburg, Yoruba) isolated from the peanut supply chain. Then, the surfaces were exposed to UV-C radiation, hot air (90 degrees C), 70% ethanol and a commercial product based on isopropyl alcohol for 5, 10, 15 and 30 min. After 30min exposure, on PP the reductions ranged from 3.2 to 4.2 log CFU/cm2 for UV-C, from 2.6 to 3.0 log CFU/cm2 for hot air, from 1.6 to 3.2 log CFU/cm2 for 70% ethanol and from 1.5 to 1.9 log CFU/cm2 for the commercial product. On SS, after the same exposure time, reductions of 1.3-2.2 log CFU/cm2, 2.2 to 3.3 log CFU/cm2, 1.7 to 2.0 log CFU/cm2 and 1.6 to 2.4 log CFU/cm2 were observed for UV-C, hot air, 70% ethanol and commercial product, respectively. UV-C was the only treatment affected by the surface material (p < 0.05) whereas the biofilm age influenced the effectiveness of UV-C and hot air (p < 0.05). For most treatment, there was significant difference among the exposure times (p < 0.05). Overall, the fastest loss in the biofilm viability was noted in the first 5 min, followed by a tail phase. The time predicted by the Weibull model for the first decimal reduction ranged from 0.04 to 9.9 min on PP and from 0.7 to 8.5 min on SS. In addition, the Weibull model indicates that most of treatments (79%) required a long-term exposure time (>30 min) to achieve 3-log reductions of Salmonella biofilms. In summary, UV-C showed the best performance on PP whereas hot air was noted to be the most effective on SS. (AU)

• FAPESP's process: 16/18724-3 - Characterization of Salmonella isolated from low water activity products: Virulence profile, resistance to antibiotics, biofilm formation, resistance to hygiene and technological processes
• Grantee: Maristela da Silva Do Nascimento
• Support Opportunities: Regular Research Grants