Post-treatment of effluents from the sulfate reduction process by anaerobic sequencing batch biofilm reactors

Author(s)

Sarti, Arnaldo ^[1] ; Cortes, Roberto S. ^[1] ; Hirasawa, Julia S. ^[1] ; Pires, Eduardo C. ^[1] ; Foresti, Eugenio ^[1]

Affiliation

^[1] Univ Sao Paulo, Dept Hidraul & Saneamento, EESC, BR-13566590 Sao Carlos, SP - Brazil

• Document type: Journal article
• Source: DESALINATION; v. 237, n. 1-3, p. 243-253, FEB 2009.
• Web of Science Citations: 3

Abstract

The main objective of this research was to evaluate the potential use of a bench-scale anaerobic sequencing batch biofilm reactor (ASBBR) containing mineral coal as inert support for removal Of Sulfide and organic matter effluents from an ASBBR (1.2 m(3)) utilized for treatment of sulfate-rich wastewater. The cycle time was 48 h, including the steps of feeding (2 h), reaction with continuous liquid recirculation (44 h) and discharge (2 h). COD removal efficiency was up to 90% and the effluents total sulfide concentrations (H(2)S, HS(-), S(2-)) remained in the range of 1.5 to 7.5 mg.l(-1) during the 50 days of operation (25 cycles). The un-ionized Sulfide and ionized sulfides were converted by biological process to elemental sulfur (S(0)) under oxygen limited conditions. The results obtained in the bench-scale reactor were used to design an ASBBR in pilot scale for use in post-treatment to achieve the emission standards (sulfide and COD) for sulfate reduction. The pilot-scale reactor, with a total volume of 0.43 m(3), the COD and total sulfide removal achieved 88% and 57%, respectively, for a cycle time of 48 h (70 days of operation or 35 cycles). (AU)