Structural and mechanical analysis and copings of experimental zirconia for use CAD/CAM system

• Grant number: 11/18061-0
• Support Opportunities: Regular Research Grants
• Start date: March 01, 2012
• End date: August 31, 2014
• Field of knowledge: Health Sciences - Dentistry - Dental Materials
• Principal Investigator: Ana Flávia Sanches Borges
• Grantee: Ana Flávia Sanches Borges
• Host Institution: Faculdade de Odontologia de Bauru (FOB). Universidade de São Paulo (USP). Bauru , SP, Brazil
• Associated researchers: José Henrique Rubo

Abstract

The aim of this study is to evaluate the mechanical properties of sintering shrinkage, maximum flexural strength, Weibull modulus, modulus of elasticity and fracture toughness of experimental zirconium compared to Zirconia manufactured for CAD / CAM and marginal adaption. Some data will be drawn from fractography Energy Dispersive Spectroscopy in Scanning Electron Microscopy (DSE/SEM). The study will bem conducted in two stages and Zirconias will be divided into five groups: ZE: Experimental Zirconia ZCO: Zirconcad, ZCA: IPS e.max ZirCAD, ZNE: Neodent Zirconia, and ZPR: Procera Allzircon. For the first step, the blocks of pre-sintered zirconia (n = 30) will be cut into standard size and taken to the oven for final sintering. After the analysis of sintering shrinkage using a caliper, the specimens will be fractured by three points flexural strength test and subjected to fractography analysis by Stereomicroscope and SEM (n = 10). The datawill be used to calculate the value of fracture toughness. Chemical analysis of the origin of the fracture will be carried out to identify the possible relationship between the composition of experimental zirconium and mechanical behavior. Flexural strength data will be analysed by Weibull analysis. Data will be analyzed by ANOVA (± = 0.05) The correlation between the EDS data and mechanical properties will be performed by the Pearson correlation coefficient. The second stage will assess the marginal adaptation of zirconia copings and abutments. To this end, ten of zirconia copings of each group will be made and the analysis of adaptation of the coping to the abutment will be held in a total of 16 measurements for each body-of-proof in predetermined sites. Data from the cracks formed will be calculated and an average value is obtained for each group and will be submitted to ANOVA (± = 0.05) for comparison between groups and Kruskal-Wallis tests to determine differences for each group. (AU)

Scientific publications

(12)

(References retrieved automatically from Web of Science and SciELO through information on FAPESP grants and their corresponding numbers as mentioned in the publications by the authors)

BASTOS, NATALIA ALMEIDA; LISBOA-FILHO, PAULO NORONHA; TABATA, AMERICO; SILVEIRA FRANCISCONI, PAULO AFONSO; FURUSE, ADILSON YOSHIO; HONORIO, HEITOR MARQUES; SANCHES BORGES, ANA FLAVIA. Effect of alternative sonochemical treatment on zirconia surface and bond strength with veneering ceramic. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, v. 252, FEB 2020. (11/18061-0)

RAMOS, CARLA MUELLER; CESAR, PAULO FRANCISCO; LIA MONDELLI, RAFAEL FRANCISCO; TABATA, AMERICO SHEITIRO; SANTOS, JULIETE DE SOUZA; SANCHES BORGES, ANA FLAVIA. BOND STRENGTH AND RAMAN ANALYSIS OF THE ZIRCONIA-FELDSPATHIC PORCELAIN INTERFACE. JOURNAL OF PROSTHETIC DENTISTRY, v. 112, n. 4, p. 886-894, OCT 2014. (11/18061-0)

FERRUZZI, FERNANDA; FERRAIRO, BRUNNA M.; PIRAS, FERNANDA F.; SANCHES BORGES, ANA FLAVIA; RUBO, JOSE HENRIQUE. Fatigue survival and damage modes of lithium disilicate and resin nanoceramic crowns. Journal of Applied Oral Science, v. 27, 2019. (13/10021-5, 11/18061-0)

RAMOS, CARLA MUELLER; CESAR, PAULO FRANCISCO; BONFANTE, ESTEUAM AUGUSTO; RUBO, JOSE HENRIQUE; WANG, LINDA; SANCHES BORGES, ANA FLAUIA. Fractographic principles applied to Y-TZP mechanical behavior analysis. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, v. 57, p. 215-223, APR 2016. (11/18061-0)

PIRES, LUARA A.; DE MEIRA, CAMILA R.; TOKUHARA, CINTIA K.; DE OLIVEIRA, FLAVIA A.; DAINEZI, VANESSA B.; GRAEFF, MARCIA S. ZARDIN; FORTULAN, CARLOS A.; DE OLIVEIRA, RODRIGO C.; PUPPIN-RONTANI, REGINA M.; BORGES, ANA FLAVIA S.. Wettability and pre-osteoblastic behavior evaluations of a dense bovine hydroxyapatite ceramics. JOURNAL OF ORAL SCIENCE, v. 62, n. 3, p. 259-264, JUL 2020. (11/18061-0, 12/07283-5, 12/06738-9, 18/23639-0)

RODRIGUES MAGALHAES, ANA PAULA; RAMOS-TONELLO, CARLA MULLER; GALLI, MATEUS ZAMORA; GOMES, ORISSON PONCE; PACHECO, LEANDRO EDGAR; FORTULAN, CARLOS ALBERTO; LISBOA-FILHO, PAULO NORONHA; LIA MONDELLI, RAFAEL FRANCISCO; FURUSE, ADILSON YOSHIO; SANCHES BORGES, ANA FLAVIA. Yttria-stabilized tetragonal zirconia polycrystal/resin luting agent bond strength: Influence of Titanium dioxide nanotubes addition in both materials. JOURNAL OF PROSTHODONTIC RESEARCH, v. 64, n. 4, p. 408-416, OCT 2020. (11/18061-0, 13/07296-2)

RAMOS-TONELLO, CARLA MULLER; TREVIZO, BRUNO FREITAS; RODRIGUES, RAPHAELA FARIAS; RODRIGUES MAGALHAES, ANA PAULA; FURUSE, ADILSON YOSHIO; LISBOA-FILHO, PAULO NORONHA; TABATA, AMERICO SHEITIRO; SANCHES BORGES, ANA FLAVIA. Pre-sintered Y-TZP sandblasting: effect on surface roughness, phase transformation, and Y-TZP/veneer bond strength. Journal of Applied Oral Science, v. 25, n. 6, p. 666-673, NOV-DEC 2017. (11/18061-0, 13/23464-2)

EDWARDS REZENDE, CARLOS EDUARDO; SANCHES BORGES, ANA FLAVIA; MACEDO, RANDER MOREIRA; RUBO, JOSE HENRIQUE; GRIGGS, JASON ALAN. Dimensional changes from the sintering process and fit of Y-TZP copings: Micro-CT analysis. Dental Materials, v. 33, n. 11, p. E405-E413, NOV 2017. (11/18061-0, 13/10021-5)

EDWARDS REZENDE, CARLOS EDUARDO; SANCHES BORGES, ANA FLAVIA; GONZAGA, CARLA CASTIGLIA; DUAN, YUANYUAN; RUBO, JOSE HENRIQUE; GRIGG, JASON ALAN. Effect of cement space on stress distribution in Y-TZP based crowns. Dental Materials, v. 33, n. 2, p. 144-151, FEB 2017. (11/18061-0, 13/10021-5)

RAMOS, CARLA MUEILER; TABATA, AMERICO SHEITIRO; CESAR, PAULO FRANCISCO; RUBO, JOSE HENRIQUE; SILVEIRA FRACISCONI, PAULO AFONSO; SANCHES BORGES, ANA FLAVIA. Application of Micro-Raman Spectroscopy to the Study of Yttria-Stabilized Tetragonal Zirconia Polycrystal (Y-TZP) Phase Transformation. Applied Spectroscopy, v. 69, n. 7, p. 810-814, JUL 2015. (11/18061-0)

RODRIGUES MAGALHAES, ANA PAULA; FORTULAN, CARLOS ALBERTO; LISBOA-FILHO, PAULO NORONHA; RAMOS-TONELLO, CARLA MULLER; GOMES, ORISSON PONCE; CESAR, PAULO FRANCISCO; FUKUSHIMA, KAREN AKEMI; LIA MONDELLI, RAFAEL FRANCISCO; SANCHES BORGES, ANA FLAVIA. Effects of Y-TZP blank manufacturing control and addition of TiO2 nanotubes on structural reliability of dental materials. CERAMICS INTERNATIONAL, v. 44, n. 3, p. 2959-2967, FEB 15 2018. (13/07296-2, 11/18061-0)

RAMOS-TONELLO, CARLA MULLER; TREVIZO, BRUNO FREITAS; RODRIGUES, RAPHAELA FARIAS; RODRIGUES MAGALHAES, ANA PAULA; FURUSE, ADILSON YOSHIO; LISBOA-FILHO, PAULO NORONHA; TABATA, AMERICO SHEITIRO; SANCHES BORGES, ANA FLAVIA. Pre-sintered Y-TZP sandblasting: effect on surface roughness, phase transformation, and Y-TZP/veneer bond strength. Journal of Applied Oral Science, v. 25, n. 6, p. 8-pg., 2017-11-01. (11/18061-0, 13/23464-2)