Evaluation of marginal adaptation and internal, of resistance to fracture after thermo-cycling and mechanical implants tensions by digital image correlation in partial prosthesis implant fixed with pillars on zirconia with different CAD/CAM systems

• Grant number: 12/08003-6
• Support type: Scholarships in Brazil - Doctorate
• Effective date (Start): July 01, 2012
• Effective date (End): April 30, 2015
• Field of knowledge: Health Sciences - Dentistry - Dental Clinics
• Principal researcher: Ricardo Faria Ribeiro
• Grantee: Francielle Alves Mendes
• Home Institution: Faculdade de Odontologia de Ribeirão Preto (FORP). Universidade de São Paulo (USP). Ribeirão Preto , SP, Brazil

Abstract

Considering the increasing aesthetic demands, the development of zirconia and use technology CAD/CAM this study aims to evaluate the internal and marginal adaptation, resistance to fracture after thermo-cycling mechanical and implants tensions by digital image correlation in partial prosthesis implant fixed with pillars and copings zirconia with diferente CAD/CAM systems compared to the conventional method (n=10). Marginal adaptation will be examined by microscope comparator with an accuracy of 1 µm and 15x increase and internal by analogous cement technique. To carry out the mechanical cycling, the prosthesis will be positioned on the machine of mechanical fatigue by chewing and applies the load of 120 N with a tip that simulates the antagonist occlusion simulating 2,000,000 cycles. During the test, the prosthesis will be kept in distilled water, and termocicladas with a variation of temperature between 5° -55° C. To verification of the tensions generated by partial prosthesis fixed around the implants will be held by digital image correlation analysis. Will be randomly selected a prosthetic and antagonist from each of CAD/CAM systems and applied a load of 250 N, with approach speed of 0.1 mm/min, using a universal testing machine with load cell of 25 kN. Through bending test, will apply a force perpendicular to the long axis of the prosthetic part until due to bending or fracture no more resistance. The results of this work will allow indicate whether or not the CAD/CAM system for making pillars and copings in zirconium with reliability in partial prosthesis fixed. (AU)

Academic Publications

(References retrieved automatically from State of São Paulo Research Institutions)

MENDES, Francielle Alves. Evaluation of the marginal and internal fit, resistance to fracture after thermomechanical cycling and tensions in the implants by correlation of digital images in fixed partial dentures on implants with abutments and copings in zirconia with different CAD/CAM systems. 2015. Doctoral Thesis - Universidade de São Paulo (USP). Faculdade de Odontologia de Ribeirão Preto (PCARP/BC) Ribeirão Preto.