CV Lattes
ResearcherID
ORCID
Google Scholar Citations
Universidade Estadual Paulista (UNESP). Campus Experimental São João da Boa Vista. Faculdade de Engenharia (Institutional affiliation from the last research proposal) Birthplace: Brazil
Associate Professor at the São Paulo State University "Julio de Mesquita Filho" - UNESP, where she carries out teaching and research activities in the Aeronautical Engineering Department. Since 2013, she has led the Nano and Microscale Heat Transfer Lab (https://nestn.com.br/home-en/), conducting experimental and numerical investigations on phase-change heat transfer. In 2023, she served as a Visiting Professor at the University of Waterloo / Institute of Nanotechnology, Canada. Prof. Cardoso is a Member of the Technical Committee of Nano and Microfluidics of the Brazilian Association of Engineering and Mechanical Sciences (ABCM). She is a Member of the Scientific Council of the International Centre for Heat and Mass Transfer (ICHMT) and the Assembly of World Conferences on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics (AWC). She is Associate Editor of SN Applied Sciences and the Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. In 2023, she received the ABCM-Embraer 2022 Award for Best Doctoral Thesis and the Springer Best Paper Award (Poster Category) during the 27th COBEM International Congress of Mechanical Engineering. Her research projects include renewable energy (photovoltaic solar energy), active and passive cooling systems to improve the performance of PV systems, the development of low-cost technologies to harness solar energy power, techniques for heat transfer intensification, and phase-change processes, and the development of numerical studies addressing physical mechanisms associated with thermal processes. (Source: Lattes Curriculum)
| News published in Agência FAPESP Newsletter about the researcher |
| More itemsLess items |
| TITULO |
| Articles published in other media outlets ( ): |
| More itemsLess items |
| VEICULO: TITULO (DATA) |
| VEICULO: TITULO (DATA) |
Latent thermal energy storage systems are more efficient due to the utilization of latent heat. Some of the systems that have been proposed include the use of phase change materials (PCMs). PCMs absorb energy when the melting temperature is reached and release the absorbed energy when there is no more supply. These materials are also used for thermal control of electronic devices, solar e…
The present proposal deals with experimental evaluation and modeling of transport phenomena typical of emerging technologies in the area of energy conversion and storage involving phase change and/or supercritical flows. These emerging technologies are related to thermohydraulic analysis of heat transfer processes including flows under supercritical thermodynamic conditions in nuclear rea…
The present proposal deals with experimental evaluation and modeling of transport phenomena typical of emerging technologies in the area of energy conversion and storage involving phase change and/or supercritical flows. These emerging technologies are related to thermohydraulic analysis of heat transfer processes including flows under supercritical thermodynamic conditions in nuclear rea…
The growing demand for high-capacity heat-removal devices of smaller dimensions has required the scientific community to research solutions such as the use of microchannel-based heat sinks. These turned out to be an efficient solution as they reduced the amount of material and coolant used and could be designed in the dimensions of chips. By combining the geometry of the microchannels wit…
(Only some records are available in English at this moment)
Electrical energy is essential for human progress, but the growing demand faces environmental challenges. Although promising, alternative and renewable sources, such as solar and wind energy, are still unstable. In this context, thermal energy storage systems (TESs) emerge as a solution, particularly those using phase change materials (PCMs), which absorb and release heat during the solid…
In recent years, the need for new forms of clean and sustainable energy generation has been increasing, as energy from fossil fuels has been showing its harm to our atmosphere for over 200 years, in addition to not being sustainable, exhausting its sources at some point. In the aeronautical sector, this problem has already been discussed, with several fronts seeking, mainly, the developme…
This research project proposes analytical and computational studies of single-phase flow in compact heat sinks based on segmented microchannels to minimize instabilities in the thermal system and maximize the heat transfer coefficient. Segmented heat sinks associated with high-performance coolants can be applied to the avionics of military or commercial aircraft, as well as in the aerospa…
This project aims to develop an analytical, numerical and experimental study of a photovoltaic system. All tests will be carried out outdoor using commercial photovoltaic panels, considering the day's weather conditions. The study has the following objectives: - to propose a heat sink from an analytical and numerical study, considering different design geometries and installation aspects;…
The constant search for techniques that optimize the process of heat transfer, including phase-change, requires the study of the dynamics of the vapor bubble in the nucleate boiling process. Thus, the present work has the objective of studying the mechanisms of heat transfer in the nucleate boiling regime by experimental tests on a plain copper surface with artificial cavity, analyzing th…
The constant search for techniques that optimize the process of heat transfer, including phase-change, requires the study of the dynamics of the vapor bubble in the nucleate boiling process. Thus, the present work has the objective of studying the mechanisms of heat transfer in the nucleate boiling regime by means of experimental tests on a flat copper surface with artificial cavity, ana…
(Only some records are available in English at this moment)
This research project proposes a computational study of single-phase flow in compact heat sinks based on segmented microchannels. Segmented heat sinks associated with high-performance refrigerants can be applied to the avionics of military and/or commercial aircraft, as well as in the aerospace area, given their ability to dissipate heat in reduced volumes, minimizing material used in the…
In this work, a method to enhance the thermal conductivity of a PDMS micro-pin fin heat sink matrix for a better heat exchange will be introduced; by mixing it with thermally conductive nanoparticles of graphene and hexagonal boron nitride (hBN) (with different mass concentrations). The obtained nanocomposites will be fully characterized to analyze their flexibility, thermal properties, a…
This work aims the theoretical and experimental study of the pool boiling by using modified heating surfaces, surfaces modified by the addition of metallic foams. The research involves the development of experimental techniques and analysis of results with the collaboration of the IN+ research group at Instituto Superior Técnico (Lisbon - Portugal). The influence of surface characteristic…
| 3 / 3 | Ongoing grants |
| 6 / 6 | Completed research grants |
| 3 / 3 | Ongoing scholarships in Brazil |
| 15 / 12 | Completed scholarships in Brazil |
| 3 / 3 | Completed scholarships abroad |
| 30 / 27 | All research grants and scholarships |
| Associated processes | |