Inflatable aerodynamic decelerators for CubeSat reentry and recovery: Surface properties

Author(s)

Caqueo, Nicolas ; Palharini, Rodrigo Cassineli ; Palharini, Rayana Santos Araujo ; Gaglio, Emanuela ; Savino, Raffaele

• Document type: Journal article
• Source: AEROSPACE SCIENCE AND TECHNOLOGY; v. 149, p. 8-pg., 2024-04-29.

Abstract

In this investigation, Direct Simulation Monte Carlo Method is used to compute the surface properties of inflatable aerodynamic decelerators (IAD) applied for the reentry, recovery, and reuse of cubeSats. Surface properties calculation is of fundamental importance for flexible thermal protection system materials selection that withstand the harsh reentry environment. Furthermore, simulations are extremely important to detect possible hot spots at the IAD before design and flight. In this work, three IAD configurations are exposed to a rarefied hypersonic flow with freestream conditions that correspond to those found at reentry conditions at 105 km altitude. All geometries are assumed to be axisymmetric and have a maximum radius of 0.3 m from the center line to the shoulder edge. The main differences between the geometries are the angle between the IAD and cubeSat body and the IAD curvature for geometry 3. According to the results, all IAD geometries are effective in protecting the cubeSat during the reentry phase. It is shown that the IAD geometry has a significant influence on the heat transfer, pressure, and skin friction coefficient distribution over the flexible heat shield. The maximum heat transfer coefficient computed for geometry 1, 2, and 3 is 0.90, 0.97, and 0.84, respectively. (AU)

• FAPESP's process: 13/07375-0 - CeMEAI - Center for Mathematical Sciences Applied to Industry
• Grantee: Francisco Louzada Neto
• Support Opportunities: Research Grants - Research, Innovation and Dissemination Centers - RIDC