Printed and flexible biosensor for antioxidants using interdigitated inkjetted electrodes and gravure-deposited active layer

Author(s)

Pavinatto, Felippe J. ; Paschoal, Carlos W. A. ; Arias, Ana C.

• Document type: Journal article
• Source: BIOSENSORS & BIOELECTRONICS; v. 67, p. 7-pg., 2015-05-15.

Abstract

Printing techniques have been extensively used in the fabrication of organic electronic devices, such as light-emitting diodes and display backplanes. These techniques, in particular inkjet printing, are being employed for the localized dispensing of solutions containing biological molecules and cells, leading to the fabrication of bio-functional microarrays and biosensors. Here, we report the fabrication of an all-printed and flexible biosensor for antioxidants. Gold (Au) interdigitated electrodes (IDEs) with sub-100 gm features were directly inkjet-printed on plastic substrates using a nanoparticle-based ink. Conductivities as high as 5 x 10(6) S/m (12% of bulk Au) were attained after sintering was conducted at plastic-compatible 200 degrees C for 6 h. The enzyme Tyrosinase (Tyr) was used in the active layer of the biosensors, being innovatively deposited by large-area rotogravure printing. A tailor-made ink was studied, and the residual activity of the enzyme was 85% after additives incorporation, and 15.5% after gravure printing. Au IDEs were coated with gravure films of the Tyr-containing ink, and the biosensor was encapsulated with a cellulose acetate dip-coating film to avoid dissolution. The biosensor impedance magnitude increases linearly with the concentration of a model antioxidant, allowing for the construction of a calibration curve. Control experiments demonstrated the molecular recognition characteristic inferred by the enzyme. We found that the biosensor sensitivity and the limit of detection were, respectively, 5.68 Omega/mu m and 200 mu M. In conclusion, a disposable, light-weight, all-printed and flexible biosensor for antioxidants was successfully fabricated using fast and large-area printing techniques. This opens the door for the fabrication of technological products using roll-to-roll processes. (C) 2014 Elsevier B.V. All rights reserved. (AU)

• FAPESP's process: 11/05742-0 - Fabrication of biosensors using printing techniques
• Grantee: Felippe José Pavinatto
• Support Opportunities: Scholarships abroad - Research