Advanced search
Start date
Betweenand
Related content

Evaluation of alloys for thermal interface contact and for additive manufacturing

Grant number: 19/23673-7
Support Opportunities:Regular Research Grants
Start date: November 01, 2020
End date: October 31, 2022
Field of knowledge:Engineering - Materials and Metallurgical Engineering - Physical Metallurgy
Principal Investigator:José Eduardo Spinelli
Grantee:José Eduardo Spinelli
Host Institution: Centro de Ciências Exatas e de Tecnologia (CCET). Universidade Federal de São Carlos (UFSCAR). São Carlos , SP, Brazil

Abstract

The present purpose aims to investigate research gaps identified in two important sectors of industry. Firstly, solidification of Sn-Bi(-In) solder alloys must be examined in copper substrates. In this case, the focus will be at the formed interfaces as a result of either solidification or localized reactions at the interface. This project will propose techniques in order to optimize the microstructure and application properties such as mechanical and corrosion resistances. These properties are crucial for thermal interfaces applied for heat dissipation. These materials are termed as TIM (Thermal Interface Materials). Pb-free TIM alloys such as Sn-Bi based ones are required nowadays due to the need of electronic devices having higher processing capabilities. The result is the need of increase heat release, i.e., more efficient and reliable TIM alloys. With this in mind, various factors must be accomplished, that is: wettability, thickness and nature of the reaction layers, Cu dissolution and microstructures. Secondly, determination of inter-relations type microstructure à processing parameters à properties remains essential for aluminium alloys with potential application in additive manufacturing (AM). For most of the alloys of interest (i.e., Al-10%Si-Mg-(Sc, Ni) and Al-5%Mg(-Sc) alloys), fundamental solidification parameters in order to control the process remain undetermined. One of the major contributions of this project will be establishing process maps so that connection between microstructure and parameters/properties could be established. Various techniques will be applied, which are: wettability (in the case of TIM alloys), corrosion, tensile and hardness tests. The characterization of intermetallic particles formed during solidification of the alloys of interest is also a concern which will be explored in this work. Intermetallics formed either at the interfaces of the Sn-Bi(-In)/substrate couples or those constituting the bulk multicomponent Al alloys will be assessed. Both thermodynamic computations and advanced microscopy will be employed in this regard. Efforts on examining the effects of Sc during age hardening of the AM alloys will be also focused on. (AU)

Articles published in Agência FAPESP Newsletter about the research grant:
More itemsLess items
Articles published in other media outlets ( ):
More itemsLess items
VEICULO: TITULO (DATA)
VEICULO: TITULO (DATA)

Scientific publications (33)
(References retrieved automatically from Web of Science and SciELO through information on FAPESP grants and their corresponding numbers as mentioned in the publications by the authors)
JUNIOR, CARLOS E. S.; REYES, RODRIGO, V; GOMES, LEONARDO F.; SPINELLI, JOSE E.; BOGNO, ABDOUL-AZIZ; HENEIN, HANI; PERANDER, L. Evaluation of Microstructures and Hardness of Al-10Si-0.45Mg-0.4Sc Alloy Powders. LIGHT METALS 2021, 50TH EDITION, v. N/A, p. 7-pg., . (18/15059-4, 19/23673-7)
DE ALBUQUERQUE SOUSA, SARAH MARIA; DE GOUVEIA, GUILHERME LISBOA; SPINELLI, JOSE EDUARDO. Evaluating grain size, dendritic scale, and tensile properties of a NbB-inoculated 6201 alloy using solidification rate. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v. 835, p. 11-pg., . (19/23673-7)
GOMES, LEONARDO FERNANDES; KUGELMEIER, CRISTIE LUIS; DELLA ROVERE, CARLOS ALBERTO; SPINELLI, JOSE EDUARDO. ffects of Ag addition and dendritic scale on the corrosion behavior of the hypoeutectic Al-5wt% Si allo. Journal of Applied Electrochemistry, v. 52, n. 4, p. 653-665, . (19/23673-7)
DA SILVA LEAL, JADERSON RODRIGO; VALENZUELA REYES, RODRIGO ANDRE; DE GOUVEIA, GUILHERME LISBOA; COURY, FRANCISCO GIL; SPINELLI, JOSE EDUARDO. Effects of Indium on Wetting and Interfacial Features of a Sn-40Bi Alloy in a Copper Substrate. JOURNAL OF ELECTRONIC MATERIALS, v. N/A, p. 14-pg., . (19/23673-7, 21/08436-9)
SEPTIMIO, RUDIMYLLA; CRUZ, CLARISSA; SILVA, BISMARCK; GARCIA, AMAURI; SPINELLI, JOSE EDUARDO; CHEUNG, NOE. Microstructural and segregation effects affecting the corrosion behavior of a high-temperature Bi-Ag solder alloy in dilute chloride solution. Journal of Applied Electrochemistry, v. 51, n. 5, p. 769-780, . (17/12741-6, 19/23673-7, 17/15158-0)
SCHON, ALINE FERREIRA; CASTRO, NICOLAU APOENA; BARROS, ANDRE DOS SANTOS; SPINELLI, JOSE EDUARDO; GARCIA, AMAURI; CHEUNG, NOE; SILVA, BISMARCK LUIZ. Multiple linear regression approach to predict tensile properties of Sn-Ag-Cu (SAC) alloys. Materials Letters, v. 304, . (19/23673-7)
XAVIER, MARCELLA G. C.; FREITAS, BRENDA J. M.; GOUVEIA, GUILHERME L.; GARCIA, AMAURI; SPINELLI, JOSE E.. The Roles of Ni and Co in Dendritic Growth and Tensile Properties of Fe-Containing Al-Si-Cu-Zn Scraps under Slow and Fast Solidification Cooling. ADVANCED ENGINEERING MATERIALS, . (19/23673-7)
SEPTIMIO, RUDIMYLLA; CRUZ, CLARISSA; XAVIER, MARCELLA; LIMA, THIAGO; GARCIA, AMAURI; SPINELLI, JOSE EDUARDO; CHEUNG, NOE. Interface evaluation of a Bi-Zn eutectic solder alloy: Effects of different substrate materials on thermal contact conductance. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, v. 160, . (19/23673-7, 17/15158-0)
VALENZUELA REYES, RODRIGO ANDRE; GARCIA, AMAURI; SPINELLI, JOSE EDUARDO. Evaluating Microstructure, Wear Resistance and Tensile Properties of Al-Bi(-Cu, -Zn) Alloys for Lightweight Sliding Bearings. METALS, v. 11, n. 1, . (19/23673-7)
SILVA, BISMARCK LUIZ; MENDES, PEDRO HENRIQUE; GARCIA, AMAURI; SPINELLI, JOSE EDUARDO. Effect of Aging on Dendritic Array, Ag3Sn Spacing, and Hardness of a Sn-2Ag-0.7Cu Solder Alloy. JOURNAL OF ELECTRONIC MATERIALS, v. 51, n. 8, p. 9-pg., . (19/23673-7)
SCHON, ALINE FERREIRA; DE GOUVEIA, GUILHERME LISBOA; SOBRAL, BRUNO SILVA; SPINELLI, JOSE EDUARDO; RIVA, RUDIMAR; CAPELLA, ALINE GONCALVES; SILVA, BISMARCK LUIZ. Microstructure and hardness of laser remelted surfaces of Al-5%Cu and Al-4%Cu-1%Ni alloys. Journal of Alloys and Compounds, v. 954, p. 12-pg., . (21/08436-9, 19/23673-7)
SILVA, BISMARCK LUIZ; GOUVEIA, GUILHERME LISBOA; CHEUNG, NOE; GARCIA, AMAURI; SPINELLI, JOSE EDUARDO. Analysis of extensive wetting angle vs. cooling rate data in Bi-, Zn- and Sn-based solder alloys. MICROELECTRONICS RELIABILITY, v. 135, p. 10-pg., . (19/23673-7)
DE SOUSA, RAI BATISTA; PAIXAO, JEVERTON LAUREANO; DANTAS, SUYLAN LOURDES DE ARAUJO; DE FREITAS, PAMELLA RAFFAELA DANTAS; DA LUZ, JEFFERSON ROMARYO DUARTE; SPINELLI, JOSE EDUARDO; SILVA, BISMARCK LUIZ. Impact of Cooling Rate and Nickel Addition on the Dendritic Spacing, Ag3Sn Morphology and Cytotoxicity of Sn-2Ag Solder. JOURNAL OF ELECTRONIC MATERIALS, v. 52, n. 11, p. 23-pg., . (21/08436-9, 19/23673-7)
SOBRAL, BRUNO SILVA; VIEIRA, PAMALA SAMARA; LIMA, THIAGO SOARES; SPINELLI, JOSE EDUARDO; CHEUNG, NOE; GARCIA, AMAURI; SILVA, BISMARCK LUIZ. Effects of Zn Addition on Dendritic/Cellular Growth, Phase Formation, and Hardness of a Sn-3.5 wt% Ag Solder Alloy. ADVANCED ENGINEERING MATERIALS, v. N/A, p. 18-pg., . (21/11439-0, 19/23673-7)
DE OLIVEIRA FILHO, MARCOS FERNANDO; CARADEC, PIERRE D'AMELIO BRIQUET; CALSAVERINI, RAFAEL; SPINELLI, JOSE EDUARDO; ISHIKAWA, TOMAZ TOSHIMI. Neural network for classification of MnS microinclusions in steels. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v. 24, p. 11-pg., . (21/08436-9, 19/23673-7)
MARCELLA GAUTÊ CAVALCANTE XAVIER; JOSÉ EDUARDO SPINELLI. The Impacts of Co and Ni Additions to High Solute Content Fe-Contaminated Al alloys in Beneficing Microstructure and Tensile Properties. MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, v. 27, . (19/23673-7, 23/06107-3)
SILVA, ARGOS SOARES; SOUSA, SARAH MARIA DE ALBUQUERQUE; DE GOUVEIA, GUILHERME LISBOA; GARCIA, AMAURI; SPINELLI, JOSE EDUARDO. The influence of NbB inoculation on dendritic spacing and grain size of an aluminum 2017 alloy at different cooling rates. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v. 125, n. 11-12, p. 16-pg., . (19/23673-7, 20/02697-2)
KAKITANI, RAFAEL; PINTO DA SILVA, CASSIO AUGUSTO; SILVA, BISMARCK; GARCIA, AMAURI; CHEUNG, NOE; SPINELLI, JOSE EDUARDO. Local solidification thermal parameters affecting the eutectic extent in Sn-Cu and Sn-Bi solder alloys. SOLDERING & SURFACE MOUNT TECHNOLOGY, . (17/12741-6, 19/23673-7, 17/15158-0)
GANDOLFI, MARESSA; CAVALCANTE XAVIER, MARCELLA GAUTE; GOMES, LEONARDO FERNANDES; VALENZUELA REYES, RODRIGO ANDRE; GARCIA, AMAURI; SPINELLI, JOSE EDUARDO. Relationship between Microstructure Evolution and Tensile Properties of AlSi10Mg Alloys with Varying Mg Content and Solidification Cooling Rates. METALS, v. 11, n. 7, . (19/23673-7)
KAKITANI, RAFAEL; PINTO DA SILVA, CASSIO AUGUSTO; SILVA, BISMARCK; GARCIA, AMAURI; CHEUNG, NOE; SPINELLI, JOSE EDUARDO. Local solidification thermal parameters affecting the eutectic extent in Sn-Cu and Sn-Bi solder alloys. SOLDERING & SURFACE MOUNT TECHNOLOGY, v. 34, n. 1, p. 24-30, . (19/23673-7, 17/12741-6, 17/15158-0)
DE GOUVEIA, GUILHERME LISBOA; GARCIA, AMAURI; SPINELLI, JOSE EDUARDO. Towards a morphological control of Mg2Si and superior tensile properties of high-Zn Mg-0.6Si (-Zn) alloys. Materials Letters, v. 299, . (19/23673-7, 19/22163-5, 19/01432-8)
KAKITANI, RAFAEL; OLIVEIRA, RICARDO; REYES, RODRIGO V.; RODRIGUES, ADILSON V.; BERTELLI, FELIPE; GARCIA, AMAURI; SPINELLI, JOSE E.; CHEUNG, NOE. Metal/mold thermal conductance affecting ultrafine scale microstructures in aluminum eutectic alloys. CASE STUDIES IN THERMAL ENGINEERING, v. 26, . (19/23673-7)
DE GOUVEIA, GUILHERME LISBOA; GARCIA, AMAURI; SPINELLI, JOSE EDUARDO. Tailoring microstructure and tensile properties of Mg-Si alloys varying solidification cooling rate and Si content. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v. 825, . (19/23673-7, 19/22163-5, 19/01432-8)
SOARES, THIAGO; CRUZ, CLARISSA; XAVIER, MARCELLA; REYES, V, RODRIGO; BERTELLI, FELIPE; GARCIA, AMAURI; SPINELLI, JOSE E.; CHEUNG, NOE. Interfacial heat transfer and microstructural analyses of a Bi-5% Sb lead-free alloy solidified against Cu, Ni and low-C steel substrates. Journal of Alloys and Compounds, v. 860, . (19/23673-7, 17/15158-0)
GOMES, LEONARDO FERNANDES; SILVA, BISMARCK LUIZ; DA SILVA, JR., PAULO SERGIO; GARCIA, AMAURI; SPINELLI, JOSE EDUARDO. Ag-containing aluminum-silicon alloys as an alternative for as-cast components of electric vehicles. MATERIALS RESEARCH EXPRESS, v. 8, n. 1, . (19/23673-7)
GOUVEIA, GUILHERME L.; GOMES, LEONARDO F.; CHEUNG, NOE; GARCIA, AMAURI; SPINELLI, JOSE E.. Mechanical Properties, Microstructural Features, and Correlations with Solidification Rates of Al-Cu-Si Ultrafine Eutectic Alloys. ADVANCED ENGINEERING MATERIALS, v. 23, n. 4, . (19/23673-7, 19/01432-8)
DE MOURA, DANUSA ARAUJO; DE GOUVEIA, GUILHERME LISBOA; GOMES, LEONARDO FERNANDES; SPINELLI, JOSE EDUARDO. Understanding the effect of Ni content on microstructures and tensile properties of AlSi10Mg alloy samples under a variety of solidification rates. Journal of Alloys and Compounds, v. 924, p. 11-pg., . (19/23673-7)
DE MOURA, DANUSA ARAUJO; GOMES, LEONARDO FERNANDES; SIQUEIRA, CLAUDIO ALVES; GARCIA, AMAURI; SPINELLI, JOSE EDUARDO. Understanding solidification and wear behaviour of Al-3Cu-Bi alloys. MATERIALS SCIENCE AND TECHNOLOGY, v. N/A, p. 11-pg., . (19/23673-7)
DIAS, MARCELINO; BOGNO, ABDOUL AZIZ; SPINELLI, JOSE EDUARDO; OLIVEIRA, RICARDO; CHEUNG, NOE; GARCIA, AMAURI; HENEIN, HANI. Microstructure and Hardness of an Al-8 wt%Si-2.5 wt%Bi Alloy Subjected to Solidification Cooling Rates from 0.1 to 800 K s(-1). ADVANCED ENGINEERING MATERIALS, v. N/A, p. 11-pg., . (16/18186-1, 19/23673-7, 18/11791-2, 17/12741-6, 17/15158-0)
XAVIER, MARCELLA G. C.; FREITAS, BRENDA J. M.; KOGA, GUILHERME Y.; SPINELLI, JOSE E.. Effects of Ni and Co on the Corrosion Resistance of Al-Si-Cu-Zn-Fe Alloys in NaCl Solution. METALS, v. 12, n. 4, p. 18-pg., . (19/23673-7)
FELIPE ESCHER SALDANHA; SARAH DE ALBUQUERQUE SOUSA; GUILHERME LISBOA DE GOUVEIA; MAURICIO DWEK; JOSÉ EDUARDO SPINELLI. Evaluation of 6000 Al Alloys for Application in Chassis of Electric Vehicles. MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, v. 25, . (19/23673-7)
GOMES, LEONARDO FERNANDES; KUGELMEIER, CRISTIE LUIS; GARCIA, AMAURI; DELLA ROVERE, CARLOS ALBERTO; SPINELLI, JOSE EDUARDO. Influences of alloying elements and dendritic spacing on the corrosion behavior of Al-Si-Ag alloys. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v. 15, p. 5880-5893, . (19/23673-7)
MARTINEZ, FELLIPE; DOS SANTOS JUNIOR, CARLOS; LEAL, JADERSON; SILVA, ARGOS; GOUVEIA, GUILHERME; SPINELLI, JOSE. Effects of Sc Addition and Direct Aging Treatment on Microstructure and Hardness of AlSi10Mg Alloy. ADVANCED ENGINEERING MATERIALS, v. N/A, p. 10-pg., . (19/21937-7, 21/08436-9, 19/23673-7)