Advanced search
Start date
Betweenand


MOS Capacitance Measurements for PEALD TiO2 Dielectric Films Grown under Different Conditions and the Impact of Al2O3 Partial-Monolayer Insertion

Full text
Author(s):
Chiappim, William ; Watanabe, Marcos ; Dias, Vanessa ; Testoni, Giorgio ; Rangel, Ricardo ; Fraga, Mariana ; Maciel, Homero ; dos Santos Filho, Sebastiao ; Pessoa, Rodrigo
Total Authors: 9
Document type: Journal article
Source: NANOMATERIALS; v. 10, n. 2, p. 22-pg., 2020-02-01.
Abstract

In this paper, we report the plasma-enhanced atomic layer deposition (PEALD) of TiO2 and TiO2/Al2O3 nanolaminate films on p-Si(100) to fabricate metal-oxide-semiconductor (MOS) capacitors. In the PEALD process, we used titanium tetraisopropoxide (TTIP) as a titanium precursor, trimethyl aluminum (TMA) as an aluminum precursor and O-2 plasma as an oxidant, keeping the process temperature at 250 degrees C. The effects of PEALD process parameters, such as RF power, substrate exposure mode (direct or remote plasma exposure) and Al2O3 partial-monolayer insertion (generating a nanolaminate structure) on the physical and chemical properties of the TiO2 films were investigated by Rutherford backscattering spectroscopy (RBS), Raman spectroscopy, grazing incidence X-ray diffraction (GIXRD), and field emission scanning electron microscopy (FESEM) techniques. The MOS capacitor structures were fabricated by evaporation of Al gates through mechanical mask on PEALD TiO2 thin film, followed by evaporation of an Al layer on the back side of the Si substrate. The capacitors were characterized by current density-voltage (J-V), capacitance-voltage (C-V) and conductance-voltage (G-V) measurements. Our results indicate that RF power and exposure mode promoted significant modifications on the characteristics of the PEALD TiO2 films, while the insertion of Al2O3 partial monolayers allows the synthesis of TiO2/Al2O3 nanolaminate with well-spaced crystalline TiO2 grains in an amorphous structure. The electrical characterization of the MOS structures evidenced a significant leakage current in the accumulation region in the PEALD TiO2 films, which could be reduced by the addition of partial-monolayers of Al2O3 in the bulk of TiO2 films or by reducing RF power. (AU)

FAPESP's process: 11/50773-0 - Center of excellence in physics and applications of plasmas
Grantee:Ricardo Magnus Osório Galvão
Support Opportunities: Research Projects - Thematic Grants
FAPESP's process: 15/10876-6 - Plasma-fungal biofilm interaction: diagnostic of the plasma and inactivation process of the Candida spp strains
Grantee:Anelise Cristina Osorio Cesar Doria
Support Opportunities: Scholarships in Brazil - Doctorate
FAPESP's process: 15/05956-0 - 15th International Conference on Atomic Layer Deposition
Grantee:Rodrigo Savio Pessoa
Support Opportunities: Research Grants - Meeting - Abroad
FAPESP's process: 16/17826-7 - Fabrication of MOS solar cells using structures Al/TiO2/SiO2/Si
Grantee:William Chiappim Junior
Support Opportunities: Scholarships in Brazil - Post-Doctoral
FAPESP's process: 18/01265-1 - Synthesis and microbiological analysis of polymer substrates coated with TiO2 and / or Al2O3 ultra-thin films by atomic layer deposition technology
Grantee:Rodrigo Savio Pessoa
Support Opportunities: Regular Research Grants